| GENERAL ALUMINUM PRODUCT SPECIFICATION SHEET |
| All aluminum products are made of 3105 or equivalent aluminum alloy and H-16 or equivalent hardness. |
| |
| THICKNESS |
.017" NOMINAL - SIDING, SOFFIT, TRIM COIL, AND ACCESSORIES. |
| |
.022" NOMINAL - SIDING,FASCIA, & TRIM COIL |
|
| |
.027" NOMINAL - GUTTER COIL |
|
| |
.032" NOMINAL - COMMERCIAL GUTTER COIL |
|
(ALL VALUES FOR ALUMINUM THICKNESS ARE NOMINAL VALUES, AND HAVE A VARIANCE OF +/- .002)
SOFFIT PANELS ARE OFFERED IN SOLID OR VENTED. VENTILATED PANELS ARE VENTED WITH .05" DEPTH OPENINGS ON A .5" STAGGERED CENTERS. FREE AIR FLOW VALUES FOR FULLY VENTED |
| |
| SOFFIT ARE AS FOLLOWS: |
| 1. 10" SOFFIT IS 14% |
| 2. 12" SOFFIT IS 13.3% |
| 3. TRIPLE FOUR IS 14% |
|
| |
| COATING SPECIFICATIONS: |
|
| COATING |
BASF POLYESTER ENAMEL |
|
| |
|
| GLOSS |
8 TO 12 ON 60 DEGREE DIGITAL GLOSS METER. ASTM TEST D523-80 |
| |
|
| EXTERIOR EXPOSURE |
FADE SHALL NOT EXCEED MORE THAN 5 COLOR DIFFERENCE UNITS WITHIN 5 YEARS. ATSM TEST D2244-79 |
| |
|
| CHALK |
NO GREATER THAN #8 RATING (EXCLUDING WHITE) WITHIN 5 YEARS . ASTM TEST D659-74 |
| |
|
| DRY FILM THICKNESS |
.70 TO .80 MILS |
| |
|
| APPLICATION |
ROLL COAT - ONE COAT FINISH APPLIED ONTO A CHEMICALLY CLEANED ALUMINUM SUBSTRATE. PAINT COATS ARE BAKED ON FINISH. |
| |
|
| DISSIMILAR MATERIALS |
CAUTION MUST BE EXERCISED WHEN ALUMINUM IS PLACED IN CONTACT WITH MATERIAL OR MATERIALS NOT COMPATIBLE WITH ALUMINUM. ALUMINUM NAILS OR FASTENERS MUST BE USED WHEN INSTALLING SIDING AND ACCESSORIES. |
| |
|
| ATSM |
MEETS STANDARDS B203
|
